Ceramic Materials for Energy Applications
Dr. Nina Orlovskaya's Publications
  1. Lukich, S., Carpenter, C., Orlovskaya, N., Micro-Raman characterization of cubic and rhombohedral ?-Sc0.1Ce0.01ZrO2 ceramics, J. Power Sources, accepted, 2009.

  2. Gangopadhayay, S., Inerbaev, T., Masunov, A., Altilio, D., Orlovskaya, N., Structural characterization combined with the first principles simulations of barium/strontium cobaltite/ferrire as promising material for Solid Oxide Fuel Cells cathodes and high temperature oxygen permeation membranes, ACS Applied Materials and Interfaces, 1, 7, 1512-1519, 2009.

  3. Viola, G., Verbulo, D., Orlovskaya, N., Reece, M.J., Time dependent behavior of ferroelectric/ferroelastic perovskites, J. Mater. Sci. Tech., accepted, 2009.

  4. Jiang, T., Wang, Y., Wang, Y., Orlovskaya, N., An, L., Quantitative Raman analysis of free carbons in polymer-derived ceramics, J. Am. Ceram. Soc., 92, 10, 2455-2458, 2009.

  5. Johnson, C., Orlovskaya, N., Coratolo, A., Cross, C., Wu, J., Gemmen, R., Liu, X., The effect of coating crystallization and substrate impurities on magnetron sputtered doped LaCrO3 coatings for metallic solid oxide fuel cell interconnects, Int. Journal of Hydrogen Energy, 34, 5, 2408-2415, 2009.

  6. Yarmolenko, S., Sankar, J., Bernier, N., Klimov, M., Kapat, J., Orlovskaya, N., Phase stability and sintering behavior of 10mol% Sc2O3-1mol%CeO2-ZrO2, Journal of Fuel Cells Science and Technology, 6, 2, 021007, 2009.

  7. Lugovy, M., Slyunyayev, V., Orlovskaya, N., An ultimate state of layered cantilever sensors under bending: a simplified evaluation, Mechanics of Advanced Materials and Structure, accepted, 2009.

  8. Orlovskaya, N., Lugovy, M., Carpenter, C., Pathak, S., Steinmetz, D., Lara-Curcio, E., Klemenz,C., Radovic, M., On thermal and vibrational properties of LaGaO3 single crystals, Acta Materialia, 57, 2984-2992, 2009.

  9. Orlovskaya, N., Lugovy, M., Verbulo, D., Reece, M.J., Dual ferroelasticity of lanthanum chromium-based multicomponent solid solution perovskite, Scripta Materialia, 60, 9, 783-786, 2009.

  10. Pathak, S., Steinmetz, D., Kuebler, J., Payzant, A., Orlovskaya, N., Mechanical behavior of La0.8Sr0.2Ga0.8Mg0.2O3 perovskites, Ceram. International, 35, 3, 1235-1241, 2009.

  11. Lugovy, M., Slyunyayev, V., Orlovskaya, N., Verbylo, D., Reece, M., Room temperature creep of LaCoO3 based perovskites: equilibrium strain under compression, Phys. Rev. B, 78, 024107, 2008.

  12. Ghosh, D., Subhash, G., Orlovskaya, N., Scratch-induced residual stress measurements within SiC particles in a ZrB2 – SiC composite using micro-Raman spectroscopy, Acta Mater., 56, 5345-5354, 2008.

  13. Orlovskaya, N., Lugovy, M., Kuebler, J., Yarmolenko, S., Sankar, J., Effect of rolling and hot pressing on mechanical properties of boron carbide based ceramics, J. Mater. Sci., 43, 17, 5942-5947, 2008.

  14. Orlovskaya, N., Lugovy, M., Pathak, S., Steinmetz, D., Lloyd, J., Fegely, L., Radovic, M., Payzant, E.A., Lara-Curzio, E., Allard, L., Kuebler, J., Thermal and mechanical properties of LaCoO3 and La0.8Ca0.2CoO3 perovskites, J. Power Sources, 182, 230-239, 2008.

  15. Lukich, S., Carpenter, Orlovskaya, N., Temperature and stress assisted cubic to rhombohedral phase transition in Sc0.1Ce0.01ZrO2 electrolyte ceramics, 33rd International Conference on Advance Ceramics and Composites, Daytona Beach, submitted, 2009.

  16. Orlovskaya, N., Sleiti, A., Naimaster, E., Bonadies, M., Kapat, J., and Johnson, C., Impact of temperature and porosity on Sc2O3-CeO2-ZrO2 Intermediate Temperature Solid Oxide Fuel Cell performance, 47th AIAA Aerospace Sciences Meeting, AIAA-2009-1207, Orlando, FL, 2009.

  17. Gangopadhayay, S., Masunov, A.E., Mesit, J., Guha, R., Kapat, J., Orlovskaya, N., Multiscale simulations of vacancy diffusion coefficients in of Barium/Strontium Ferrate/Cobaltate (BSCF) as a promising material for solid oxide fuel cell, The Fourth International Conference on Multiscale Materials Modeling. October 27-31, 2008.

  18. S. Ganopadhyay, T. Inerbaev, A. E. Masunov, D. Altilio, N. Orlovskaya, J. Mesit, R. Guha, A. Sleiti, J. Kapat. Density functional theory and multiscale simulations combined with spectroscopic study of Barium/Strontium Ferrate/Cobaltate (BSCF) as a promising material for solid oxide fuel cell (SOFC), 17th Conference on Current Trends on Computational Chemistry. October 31-November 1, 2008.

  19. Radovic, M., Speakman, S.A., Allard, L.F., Payzant, E.A., Lara-Curzio, E., Kriven,W., Lloyd, J., Fegely, L., Orlovskaya, N., Thermal properties and structural stability of LaCoO3 in reducing and oxidizing environments, J. Power Sources, 184, 1, 77-83 2008.

  20. Ghosh, D.,Subhash, G., Orlovskaya, N., Scratch-induced deformation and residual stress in a zirconium diboride-silicon carbide composite, 32nd International Conference on Advance Ceramics and Composites, Daytona Beach, published, 2008.

  21. Ghosh, D., Subhash, G., Orlovskaya, N., Scratch-induced residual stress measurements within SiC particles in a ZrB2 – SiC composite using micro-Raman spectroscopy, Phys. Rev. B, submitted, 2008.

  22. Rosten, R., Swanson, M., Kuebler, J., Kapat, J., Orlovskaya, N., Characterization of (La0.9Sr0.1)0.95Cr0.85Mg0.1Ni0.05O3 perovskite ceramics for a perovskite related membrane reactor, in Solid-State Ionics, edited by E. Traversa, T. Armstrong, C. Masquelier, and Y. Sadaoka (Mater. Res. Soc. Symp. Proc.972, Warrendale, PA, 2007), 0972-AA02-07.

  23. Zevalkink, A., Hunter, A., Swanson, M., Johnson, C., Kapat, J., Orlovskaya, N., Processing and characterization of SC2O3-CeO2-ZrO2 electrolyte based Intermediate Temperature Solid Oxide Fuel Cells, in Solid-State Ionics, edited by E. Traversa, T. Armstrong, C. Masquelier, and Y. Sadaoka (Mater. Res. Soc. Symp. Proc.972, Warrendale, PA, 2007), 0972-AA03-04.

  24. Pathak, S., Kalidindi, S., Klemenz, C., Orlovskaya, N., Mechanical properties of LaGaO3 single crystals by indentation. Part II. Indentation by spherical indenters, Mat. Sci. Eng. A., submitted, 2007.

  25. Kuebler, J., Blugan, G., Lugovy, M., Slyunyayev, V., Orlovskaya, N., Dobedoe, R., Development of failure tolerant multilayer silicon nitride ceramics: Review from macro to micro layered structures, Key Engineering Materials, 333, 117-126, 2007.

  26. Orlovskaya, N., Lugovy, M., Kuebler, J., Yarmolenko, S., Sankar, J., Effect of rolling and hot pressing on mechanical properties of boron carbide based ceramics, J. Mat. Sci, submitted 2007.

  27. Orlovskaya, N., Coratolo, A., Lugovy, M., Johnson, C., Gemmen, R., Structural evolution of La-Cr-O thin films: Part I. Microstructure and phase development, Thin Solid Films, 515, 1741-1747, 2006.

  28. Chi, M., Browning, N., Orlovskaya, N., Microstructural evolution of protective La-Cr-O films studied by Transmission Electron Microscopy, J. Solid State Electrochemistry, 10, 659-662, 2006.

  29. Orlovskaya, N., Anderson, H., Brodnikovskyy, M., Lugovy, M., Reece, M., Inelastic deformation behaviour of La0.6Sr0.4FeO3 perovskite, J. Appl. Phys., 100, 026102, 2006.

  30. Isupova, L., Obyskalova, E., Rogov, V., Tsybulya, S., Dovlitova, L., Burgina, E., Ischenko, A., Zaikovskii, Sadykov, V., Orlovskaya, N., Doped ceria-LaMeO3 (Me=Mn, Fe, Co) nanocomposites: synthesis via mechanochemical activation route and properties, in Generation, Storage and Fuel Cells, edited by Anne Dillon, Charles Olk, Constantina Filiou, Jim Ohi (Mater. Res. Soc. Symp. Proc. 885, Warrendale, PA, 2006), 0885-A03-04.1.

  31. Sadykov, V., Frolova-Borchert, Y., Alikina, G., Lukashevich, A., Bunina, R., Zabolotnaya, G., Mezentseva, N., Moroz, E., Rogov, V., Zaikovskii, V., Ishchenko, A., Uvarov, N., Zyryanov, V.V., Orlovskaya, N., One-pot synthesis of mixed ionic-electronic conducting nanocomposites comprised of fluorite-like and perovskite-like phases as catalytic materials for SOFC, Nanoparticles and Nanostructures in Sensors and Catalysis, edited by C.-J. Zhong, N. A. Kotov, W. Daniell, F. P. Zamborini, (Mater. Res. Soc. Symp. Proc. 900E, Warrendale, PA, 2006), 0900-O10-08.1.

  32. Coratolo, A., Orlovskaya, N., Johnson, C., Gemmen, R., Structural evolution of La0.9Sr0.1Cr0.9Co0.1O3 thin films for SOFCs and catalysis, Nanoparticles and Nanostructures in Sensors and Catalysis, edited by Chuan-Jian Zhong, Nicholas A. Kotov, Wayne Daniell, Francis P. Zamborini (Mater. Res. Soc. Symp. Proc. 900E, Warrendale, PA, 2006), 0900-O06-27.1.

  33. Orlovskaya, N., Lugovy, M., Ko, F., S. Yarmolenko, J. Sankar, Kuebler, J., SiC/SiCwoven fabric laminates: Design, manufacturing, mechanical properties, Composites Part B Engineering, 27, 6, 524-529, 2006.

  34. Orlovskaya, N., Lugovy, M., Kuebler, J., Yarmolenko, S., Sankar, J., Design of tough ceramic laminates by residual stresses control, Chapter 7 in: Ceramic Matrix Composites: Microstructure/Property Relationship, editor I.M. Low, Woodhead Publishing Ltd, Cambridge, pp. 178-215, 2006.

  35. Coratolo, A., Orlovskaya, N., Lugovy, M. Slyunayaev, V., Dub., S., Johnson, C., Gemmen, R., Nanoindentation of LaCrO3 thin film, J. Mat. Sci., 41, 10, 3105-3111, 2006.

  36. Johnson, C., Gemmen, R., Poston, J., Schaeffer, C., Orlovskaya, N., Fegely, L., Rawn, C., Perovskite based protective coatings for Solid Oxide Fuel Cell metallic interconnects, Proceeding of Ninth International Meeting of Solid Oxide Fuel Cells, Quebec City, 1842-1850, 2005.

  37. Orlovskaya, N., Nicholls, A., Yarmolenko, S., Sankar, J., Johnson, C., Gemmen, R., Microstructural characterization of La-Cr-O thin films deposited by magnetron sputtering on the stainless steel interconnect materials for SOFC application, in a book "Fuel Cells: State and Prospectives ", Eds. Sammes, N., Vasylyev, O., Kluwer Academic Publishers, 355-371, 2005.

  38. Orlovskaya, N., Steinmetz, D., Yarmolenko, S., Pai, D., Sankar, J., Goodenough, J., Detection of temperature and stress induced modifications of LaCoO3 by micro-Raman spectroscopy, Phys. Rev. B, 72, 014122-1-7, 2005.

  39. Orlovskaya, N., Lugovy, M., Subbotin, V., Radchenko, O., Adams, J., Chheda, M., Shih, J., Sankar, J., Yarmolenko, S., Robust design and manufacturing of ceramic laminates with controlled thermal residual stresses for enhanced toughness, J. Mat. Sci., 40, 5483-5490, 2005.

  40. Orlovskaya, N., Kuebler, J., Subbotin, V., Lugovy, Design of Si3N4 -based ceramic laminates by residual stresses, J. Mat. Sci., 40, 5443-5450, 2005.

  41. Blugan, G., Dobedoe, R., Gee, I., Orlovskaya, N., Kuebler, J., Failure behavior of high toughness multilayer Si3N4 and Si3N4-TiN based laminates, Key Engineering Materials, 290, 175-182, 2005.

  42. Lugovy, M., Sljunyaev, V., Orlovskaya, N., Blugan, G., Kuebler, J., Lewis, M., Apparent fracture toughness of Si3N4 based laminates with residual compressive or tensile stresses in surface layers, Acta Mater., 53, 289-296, 2005.

  43. Orlovskaya, N., Coratolo, A., Johnson, C., Gemmen, R., Characterization of LaCrO3 perovskite coating deposited by magnetron sputtering on an iron based chromium containing alloy, J. Am. Ceram. Soc., 87, 10, 1981-1987, 2004.

  44. Mixed Ionic Electronic Conducting Perovskites for Advanced Energy Systems, Eds. N. Orlovskaya, N. Browning, Kluwer Academic Publishers, pp.315, 2004.

  45. Orlovskaya, N., Steinmetz, D., Raman diagnostics of LaCoO3 based perovskites, in book "Mixed ionic electronic conducting perovskites for advanced energy systems", Eds. Orlovskaya, N., and Browning, N., Kluwer Academic Publishers, p. 37-49, 2004.

  46. Wiik, K., Fossdal, A., Sagdahl, L., Lein, H., Menon, M., Faaland, S., Waernhus, I., Orlovskaya, N., Einarsrud, M.-A., Grande, T., LaFeO3 and LaCoO3 Based Perovskites: Preparation and Properties of Dense Oxygen Permeable Membranes, in book "Mixed ionic electronic conducting perovskites for advanced energy systems", Eds. Orlovskaya, N., and Browning, N., Kluwer Academic Publishers, p.72-82, 2004.

  47. Blugan, G., Orlovskaya, N., Lewis, M., Kuebler, J., Multilayer silicon nitride laminates exhibiting high fracture toughness and crack deflection, Key Engineering Materials, 280-283, 1863-1868, 2004.

  48. Lugovy, M., Slyunyayev, V., Subbotin, V., Orlovskaya, N., Gogotsi, G., Crack arrest in Si3N4-based layered composites with residual stress, Composites Science and Technology, 64, 13-14, 1947-1957, 2004.

  49. Johnson, C., Gemmen, R., Orlovskaya, N., Nano-structured self-assembled LaCrO3 thin film deposited by RF magnetron sputtering on a stainless steel interconnect material, Composites, Part B: Engineering, 35, 2, 167-172, 2004.

  50. Orlovskaya, N., Browning, N., Nicholls, A., Ferroelasticity in mixed conducting LaCoO3 based perovskites: A ferroelastic phase transition, Acta. Mater., 51, 17, 5063-5071, 2003.

  51. Orlovskaya, N., Adams, J., Chheda, M., Shih, J., Yarmolenko, S., Sankar, J., Lugovy, M., Subbotin, V., Boron carbide - silicon carbide laminate ceramics for ballistic protection, Proceedings of IMECE-03, 2003 ASME International Mechanical Engineering Congress & Exposition, Washington, D.C., November 16-21, 2003.

  52. Orlovskaya, N., Lugovy, M., Subbotin, V., Radchenko, O., Adams, J., Chheda, M., Shih, J., Sankar, J., Yarmolenko, S., Design and manufacturing B4C-SiC layered ceramics for armor applications, in the book "Ceramic Armor and Armor Systems" (Ceramic Transactions, Volume 151) 2003, pp. 59-70.

  53. Lugovy, M., Orlovskaya, N., Slyunayev, V., Gogotsi, G., Kuebler, J., Sanchez-Herencia, A., Crack bifurcation features in laminar specimens with fixed total thickness, Composite Science and Technology, 62, 819-830, 2002.

  54. Orlovskaya, N., Gogotsi, Y., Reece, M., Cheng, B., Gibson, I., Ferroelasticity and hysteresis in LaCoO3 based perovskites, Acta Mater., 50, 4, 715-723, 2002.

  55. Orlovskaya, N., Kuebler, J., Subbotin, V., Tough ceramic laminates by design of residual stresses, Advanced Fibers, Plastics, Laminates and Composites, edited by F. T. Wallenberger, N. E. Weston, R. Ford, R. P. Wool, K. Chawla, (Mater. Res. Soc. Symp. Proc. 702, Warrendale, PA, 2002), U8.7.1.

  56. Orlovskaya, N., Gogotsi, Y., Residual stresses in Si3N4 based ceramic laminates, Key Engineering Materials, 206-213, 1025-1028, 2002.

  57. Orlovskaya, N., Gogotsi, Y., Nicholls, A., Twins in LaCoO3 based ferroic perovskites, Proceedings of 7th Int. Symp. On Solid Oxide Fuel Cells, Eds. Yokokawa, H., Singhal, S.C., 2001-16, 624-632, 2001.

  58. Orlovskaya, N., Ge, D., Nicholls, A., In-Situ TEM Study of High Temperature Stability of LaCoO3 Based Ferroic Perovskites, Key Engineering Materials, 206-213, 2001.

  59. Kleveland, K., Orlovskaya, N., Grande, T., Moe, A.-M., Einarsrud, M.-A., Breder, K., Gogotsi, G., Non-linear behavior of LaCoO3 perovskites, J. Am. Ceram. Soc., 84, 9, 2029-2033, 2001.

  60. Lugovy, M., Orlovskaya, N., Berroth, K., Kuebler, J., Analysis of layered composite with crack deflection controlled by layer thickness, Proceedings of the NATO ASI "Functional gradient materials and surface layers prepared by fine particle technology", Kiev, Ukraine, 18-28 June, 2000, Ed. By M.-I. Baraton and I. Uvarova, NATO Science Series, II, Mathematics, Physics and Chemistry, 16, Kluwer Academic Publishers, 273-280, 2001.

  61. Orlovskaya, N., Kleveland, K., Grande, T., Einarsrud, M.-A., Mechanical properties of LaCoO3-based ceramics, J. Eur. Ceram. Soc., 20, 51-56, 2000.

  62. Orlovskaya, N., Gonzalez, N., Nonelastic ferroelastic behavior of LaCoO3 based ceramics under contact loading, J. Materials Processing and Manufacturing Science, 9, 53-63, 2000.

  63. Lugovy, M., Orlovskaya, N., Berroth, K., Kuebler, J., Macrostructural engineering of ceramic-matrix layered composites, Composite Science and Technology, 59, 8, 1429-1437, 1999.

  64. Lugovy, M., Orlovskaya, N., Berroth, K., Kuebler, J., Microstructural Engineering of Ceramic-Matrix Layered Composites: Effect of Grain Size Dispersion on Single-Phase Ceramic Strength, Composite Science and Technology, 59, 2, 283-289, 1999.

  65. Yaroshenko, V., Orlovskaya, N., Einarsrud, M.-A., Kovylayev, V., Processing of multilayered Si3N4-TiN hot-pressed ceramic composites /Proceedings of NATO ARW "Multilayered and fibre-reinforced composites: Problems and Prospects", Kluwer, Dordrech, 285-295, 1998.

  66. Ostrovoj, D., Orlovskaya, N., Kovylayev, V., Firstov, S., Mechanical Properties of Toughened Al2O3-ZrO2- TiN Ceramics, J. Europ. Ceram. Soc., 18, 381-388, 1998.

  67. Orlovskaya N, Peterlik H., Marczewski M., Kromp K. The validity of Weibull estimators - experimental verification, J. Mat. Sci., 3, 978-983, 1997.

  68. Yaroshenko, V., Orlovskaya, N., Einarsrud, M.-A., Berroth, K., Kovylayev, V., Laminar Si3N4-TiN hot-pressed ceramic composites, Euro Ceramics 3, Key Engineering Materials, 132-136, 2017-2020, 1997.

  69. Orlovskaya, N., Krivoshej, G., Babij, O., Ostrovoj, D., Effect of annealing on microstructure, phase composition and failure of Al2O3-ZrO2 ceramics at room temperature, J. Mat. Sci. Let. , 3, 106-109, 1996.

  70. Orlovskaja, N., Peterlik, H., Steinkellner, W., Kromp, K., Prediction of strength of recrystallized siliconcarbide from pore sized measurement. Part I - The bimodality of the distribution; Journal of Materials Science 35 (2000) 699-705

  71. Peterlik, H., Orlovskaja, N., Steinkellner, W., Kromp, K., Prediction of strength of recrystallized siliconcarbide from pore sized measurement. Part II - The reliability of the prediction; Journal of Materials Science 35 (2000) 699-705

** PLEASE DESCRIBE THIS IMAGE **
** PLEASE DESCRIBE THIS IMAGE **
** PLEASE DESCRIBE THIS IMAGE **
** PLEASE DESCRIBE THIS IMAGE **